A complete hydraulic fittings system Threads reducer consists of five parts, namely, power components, the implementation of components, control components, auxiliary components and hydraulic fittings oil. The role of dynamic components is the original motivation of the mechanical energy into fluid pressure energy, refers to the hydraulic fittings system pump, which provides power to the entire hydraulic fittings system. Structure of hydraulic fittings pumps generally gear pumps, vane pumps and piston pumps. Implementation of the components (such as the hydraulic fittings cylinder and hydraulic motor) is to pressure the liquid can be converted to mechanical energy to drive the load in a straight line reciprocating motion or rotary motion.Control elements (ie all kinds of hydraulic valves) in the hydraulic system to control and regulate fluid pressure, flow and direction. Under the control of different hydraulic pressure control valve can be divided into valves, flow control valves and directional control valves.
Pressure control valve is divided into pressure relief valve (safety valve), reducing valves, sequence valves, pressure switch, etc.; flow control valves including throttle, adjusting the valve, diverting flow valve assembly; directional control valves, including one-way valve , check valve, shuttle valve, valve and so on. Different ways under control, hydraulic control valve can be divided into switching valves, control valves and set the value of proportional control valves. Auxiliary components including fuel tank, filter, tubing and pipe joints, seals, pressure gauge, oil level, oil temperature meter, etc.. Hydraulic oil is a hydraulic fittings system transmits energy to the work of the media, there are all kinds of mineral oil, hydraulic oil emulsion Hop forming broad categories.High-pressure hydraulic fittings accessories include a body with central channel, a channel, the first thread, and the extension, which, between the threaded part of the channel was sold and Kuozhan part, which smooth the remote central and Tong Guo Lian Jie 1 and the second one away end of the body.
The first O-ring channel is. A lock nut in the body. Locking nut has a thread within the thread part of it is part of the arrangement on the body mate.Involves a hydraulic fittings for connecting tube flare is a tubular plug male in the outbreak with rounded corners rounded edges or line contact sealing surface. In the male plug end wall is flexible to allow deflection of the wall fitting to tighten as to keep the seal line, to ensure tight seal in the process of using the load section adjacent to the edge of a circle.In the existing technology, hydraulic fittings thread has been used for a long time. These measures include internal screw cap carrying the seat around the outbreak of the hydraulic fittings fluid tubes, and has a male plug male connector for insertion into the male thread and part of the ceiling of the end of male plug is forced to tighten the seat. The plug has an end edge in sealing seats.
In many cases, both ends of plugs and seats made the same point of view, so that they can in a very large surface area is the provision of hydraulic fittings fluid for hydraulic fittings pressure seal used seats is through the line or internal channels.Hose fittings types and specifications of many common plug-type structure of fast, quick-change style, flare, quick screw-type and the pagoda-style and so on. Fittings in the form of straight hose fittings, terminal connector, right angle connector, tee joint, four-way joint, multi-way connector, reducer hose fittings, internal and external thread connector, connector with one-way throttle valve used in different occasions such as the various tube connector. Fittings, or plastic material usually made of brass. Some of the nickel-plated brass body with polished chrome layer together to increase the corrosion resistance and appearance. Fittings with metric fine pitch thread, cylindrical and tapered pipe thread pipe thread, from the point of sealing is recommended tapered pipe thread connector, the threads coated with a sealing layer.
